Auto Mechanic
Job Descriptions:
Employee:
Job Title: Master Technician, A Tech
Job Description: The Master Tech/A Tech is a senior shop technician and is responsible for performing all diagnostic and repair services as required while meeting personal production goals. This Technician also helps ensures the center functions efficiently and profitably as a unit.
Specific tasks:
1. Demonstrate a thorough knowledge of Automotive Drivability, Engine, Electrical, Drivetrain, Brakes, Suspension, Steering, A/C and Heating, Transmission and Transaxle, and Computerized system problem diagnosis, repair, rebuilding, maintenance services and processes including transmission removal and installation.
2. Demonstrate knowledge of systems affecting transmission performance.
3. Work with other center technicians to insure productivity and quality services are maintained.
4. Consistently follow AAMCO procedures to meet quality and production goals.
5. Assist CSM with parts identification and ordering.
6. Accurately perform (MPI) Multi-Point Inspections
7. Perform all repairs including Total Car Care and Maintenance Services offered.
8. Work with all employees to ensure quality is maintained and evaluate CBs to determine cause and solution.
9. Participate in required on-going AAMCO training and certification programs.
10.Maintain a clean work environment and perform equipment maintenance as required.
11.Perform special projects as directed by the Dealer or CSM.
Standards of Performance:
o Deliver 100% customer satisfaction to every customer.
o Work toward high productivity standards
o Above 100% productivity - personal labor hours produced to hours worked (clocked in)
o Work toward continual improvement of CB ratios
o Overall shop CB rate below _10_%
o Maintain a clean, organized work environment.
o Adhere to all Federal, State and Local environmental and safety regulations (OSHA, EPA, etc.)
o Help CSM and Forman manage parts cost
o Participate in all required AAMCO training.
o Must have an EPA approved Air Conditioning Refrigerant handling License (IMAC, MAC, ASE)
o Must have a current driver's license
o Work toward specific AAMCO Certification status and earn and maintain appropriate ASE Automobile & Light Truck SeriesCertifications for specific specialty services assigned. A1 - Engine Repair , A2 - Automatic Transmission/Transaxle, A3 - Manual Drive Train & Axles, A4 - Suspension & Steering, A5 - Brakes, A6 - Electrical/Electronic Systems, A7 - Heating & Air Conditioning, A8 - Engine Performance, and working toward A9 - Light Vehicle Diesel Engines, and L1 - Advanced Engine Performance Specialist.
Employee:
Job Title: Transmission Builder/Master Builder
Job Description: The builder is responsible for diagnosing and building transmissions in the AAMCO center. The builder must be proficient in rebuilding all transmissions - manual and automatic. The builder will assist the team in ordering parts, maintaining inventory and performing R&R and basic Total Car Care repair and maintenance services as required. The builder will help the CSM/shop foreman determine proper work flow and work distribution.
Specific tasks:
1. Demonstrate a thorough knowledge of transmission problem diagnosis and rebuilding.
2. Consistently follow AAMCO procedures to meet quality and production goals.
3. Accurately perform (MPI) Multi-Point Inspection reports when required.
4. Assist CSM and Shop Forman with parts ordering.
5. Work with, or as needed, as an R&R and Total Car Care Technician to insure productivity and quality services are maintained.
6. Evaluate CBs to determine cause and solution.
7. Participate in on-going AAMCO training and certification program.
8. Maintain a clean work environment and perform equipment maintenance as required.
9. Perform special projects as directed by the Dealer or CSM.
Standards of Performance:
o Deliver 100% customer satisfaction to every customer.
o Work toward high productivity standards
? Units per week: minimum of 4
? 100% productivity - personal labor hours produced to hours worked
? Work toward continual improvement of CB ratio
? Overall shop CB rate below _10_%
o Maintain a clean, organized work environment.
o Adhere to all Federal, State and Local environmental and safety regulations (OSHA, EPA, etc.)
o Help CSM and Forman manage parts cost
o Maintain required AAMCO training.
o Work toward AAMCO Master Builder status
o Must have a current driver's license
o Work toward specific AAMCO Certification status and maintain appropriate ASE Automobile & Light Truck SeriesCertifications for specific specialty services assigned. A2 - Automatic Transmission/Transaxle, A3 - Manual Drive Train & Axles.
Employee:
Job Title: B Technician
Job Description: Operate as a technician with basic certifications and licenses who is responsible for completing (MPI) Multi-Point Inspections and other documentation, diagnosing customer concerns including preliminary and final road tests,. Assist with and service external transmission components on all vehicles and installing and removing transmissions when necessary to meet production goals. Identify Total Car Care business opportunities (brakes, belts, hoses, AC, maintenance items, etc.) on all vehicles and perform those general repair and maintenance services in an efficient and quality manner.
Specific tasks:
1. Demonstrate a basic knowledge of vehicle performance and drivability diagnostics/repair and transmission removal and installation.
2. Demonstrate knowledge of systems affecting transmission performance.
3. Consistently follow AAMCO procedures to meet quality and production goals.
4. Accurately perform (MPI) Multi-Point Inspections
5. Perform all Total Car Care Repair and Maintenance Services offered.
6. Work with all employees to ensure quality is maintained and help evaluate CBs (Comebacks) to determine cause and solution.
7. Participate in on-going AAMCO training and certification programs.
8. Maintain a clean work environment and perform equipment maintenance as required.
9. Perform special projects as directed by the Dealer or CSM.
Standards of Performance:
o Deliver 100% customer satisfaction to every customer.
o Work toward high productivity standards
o Above 85% productivity - personal labor hours produced to hours worked
o Work toward continual improvement of CB ratios
o Overall shop CB rate below _10_%
o Maintain a clean, organized work environment.
o Adhere to all Federal, State and Local environmental and safety regulations (OSHA, EPA, etc.)
o Help CSM and Forman manage parts cost
o Participate in all required AAMCO training.
o Must have an EPA approved Air Conditioning Refrigerant handling License (IMAC, MAC, ASE)
o Must have a current driver's license
o Work toward specific AAMCO Certification status and earn and maintain appropriate ASE Automobile & Light Truck SeriesCertifications for specific specialty services assigned. A1 - Engine Repair , A4 - Suspension & Steering, A5 - Brakes, A6 - Electrical/Electronic Systems, A7 - Heating & Air Conditioning, A8 - Engine Performance,
Employee:
Job Title: C Technician
Job Description: The C Technician is an entry level technician working toward certifications. This technician is responsible for installing and removing transmissions, completing (MPI) Multi-Point Inspections and other required documentation, assisting with external transmission performance problem identification and servicing external transmission components on all vehicles. Also responsible for identifying any Total Car Care business opportunities (brakes, belts, hoses, AC, and maintenance services, etc.) on all vehicles and performing those general repair and maintenance services in an efficient and quality manner.
Specific tasks:
1. Demonstrate a thorough knowledge of transmission removal and installation and performance of common maintenance and repair services.
2. Consistently follow AAMCO procedures to meet quality and production goals.
3. Accurately perform (MPI) Multi-Point Inspections
4. Perform Total Car Care Services as required.
5. Work with other employees to ensure quality is maintained.
6. Participate in on-going AAMCO training and certification program.
7. Maintain a clean work environment and perform equipment maintenance as required.
8. Perform special projects as directed by the Dealer or CSM.
Standards of Performance:
o Deliver 100% customer satisfaction to every customer.
o Work toward high productivity performance
o 75% productivity - personal labor hours produced to hours worked
o Work toward continual quality improvement
o Maintain a clean, organized work environment.
o Adhere to all Federal, State and Local environmental and safety regulations (OSHA, EPA, etc.)
o Participate in all required AAMCO training.
o Maintain required AAMCO certification levels for current position and work toward specific AAMCO Certification requirements for advancement
o Work toward earning ASE certifications to qualify for next position and career advancement.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
